Putting In a New Shower Unit: Key Steps for DIY Enthusiasts

Get Quote Now

What are your thoughts regarding Simple ways to Install a Shower Cubicle on Your Own?

An effective shower installation needs careful planning and a great deal of work. In many cases, you will need to do three types of tasks: mounting walls, mounting the plumbing, as well as ending up wall surfaces.

Preparation

First of all, you should pick the type of shower that you wish to set up. It is important to determine whether the chosen shower is capable of coping with certain systems and can regulate a risk-free level of water with the central heating boiler. Most shower systems nowadays are created to be adaptable to various water pressures (such as kept hot water as well as cool mains).
It is also vital to take into consideration the water pressure and the preparation of the piping as well as drain for the shower

Different Types of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower device can be linked to the bathroom tap according to your requirement, and the water temperature can be adjusted by means of the taps. Push-on mixers are cheap as well as extremely basic to set up. Nonetheless, although the hose pipe link is straightforward, it is quickly dislodged. In addition, it is troublesome to adjust the temperature.

Bath/Shower Mixer: The pipe and spray of this sort of shower are combined with a bathroom mixer tap, as well as the temperature level can be adjusted via the bathroom taps. It is a really cheap option as well as no added plumbing is included. However, the bath/shower mixers additionally deal with troublesome temperature control options.

Manual Mixer: The hose pipe and also spray of a hand-operated mixer shower unit are a part of the wall surface device and also the cold and hot water products are attached to a single valve The temperature level and stress of the water are managed with either one or a selection of handles (in much more pricey showers). Although temperature control is much easier in hand-operated mixer kinds, they are extra pricey than the previously pointed out mixers. They likewise call for additional plumbing of hot and cold water pipes.

Thermostatic Mixer: The tube as well as spray of this shower kind are a part of the wall system and also the cold and hot water products are attached to a single shutoff below too. It is total with an integrated stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be too warm. Among the largest benefits of a thermostatic mixer shower kind includes practical temperature control. Nonetheless, it is one of the most pricey of the various mixer options.

Power Shower: A power shower is a solitary device containing a powerful electrical pump that is capable of modifying both the water stress as well as temperature. This type of shower can be fitted if there is water system from a cold water tank and also a hot water cyndrical tube. A power shower makes the adjustment of both pressure and also temperature level simple. On the other hand, it disagrees for water heated straight by the shower or where the water is supplied by a mix central heating boiler under mains stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and it heats up the water electrically. It is necessary to note that for this shower kind to be installed, the mains pressure requires to be a minimum of 0.7 kg/sq centimeters (10lb/sq in). The device allows the temperature level as well as pressure to be changed using a knob. Versions with temperature level stabilisers are much better as they continue to be untouched by other faucets in other places in operation within the family. A significant disadvantage of electrical showers is that the control handle just permits the choice of heats at much less pressure, or reduced temperature levels at a higher stress. This is troublesome in the winter when the spray is usually weak and the keys water is cooler. Nevertheless, this issue is tackled in some designs which are readily available with a winter/summer setting.

Approach

Relying on the sort of shower you desire to install, the shower head have to either be suited order to avoid its contact with the water in the bath listed below or the base tray, or it should have a check shutoff.
Prior to beginning, it is a good idea to mark the positions of the shower head and also control, and to intend the pipe-work entailed. Furthermore, the drainage system to get rid of the drainage will certainly need to be prepared. Both positions of the cable television course and also the shower button will additionally require to be taken into consideration if a rapid or electrical shower device is being set up.
Use the guideline overview offered with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is important to cut off the water supply. In order to shield the pipes, they need to be given a waterproof covering as well as also fitted with isolating shutoffs. The pipelines can after that be buried into the wall as well as plastered over to neaten the general look.
Fit the base tray, shower head, and installations.
Link the major shower control to the pipes that will certainly be providing the water (This might require a female screw thread adapter).
Reconnect the water and also test the pipes for any type of leakages, as some may need tightening up.
If you are installing an electric shower, keep in mind to switch off the electrical energy supply before making any electric links. When these links have been made (there ought to be assistance within the instruction manual), the power supply can be switched over back on.

Changing Water Pressure to Match Your Shower

The cold water storage tank can be lifted to a better elevation (often just 150mm (6inches)) by fitting a solid wood assistance below it - potentially composed of struts and also blockboards. If you choose this alternative, the primary and circulation pipelines will likewise have to be elevated to fulfill the new elevation of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it needs to be attached into the power supply in order to run.

Piping and Drainage

It is best to use 15mm diameter supply pipes, and also make the go to the shower as short and straight as feasible so regarding preserve maximum stress and reduce heat loss. Additionally, by minimising the use of elbows for pipe corners, you can decrease the resistance in the circulation of the water. You can attain this by flexing the pipes rather.

Many Typical Blunders

Breaking or neglecting neighborhood code restrictions.

Making use of pipes that are too small.

Affixing copper to galvanized without utilizing a brass or dielectric suitable in between the two.

Not making use of tape or pipeline substance at threaded joints.

Uneven your components when mounting them.

Not installing an air gap loading for fixtures.

Cutting supply stub outs too short to install the shutoff valves onto after the ended up wall remains in location.

Not appropriately lining up tubing right into installations or stop valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will create a leakage.).

When transforming the water back on in your house, constantly run the outdoors tube valve or flush your bathrooms to bleed dirt and air from the lines. This particles can trigger issues in your sink faucets and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Hopefully you enjoyed our post on How to Install a Freestand. Thanks a lot for taking the time to read our post. Appreciated our blog posting? Please share it. Help another person find it. We enjoy reading our article about How to Install a Direct-to-Stud Shower Enclosure.

Request Appointment